Reupholstering a sofa or couch is an amazing way to give new life to old furniture without spending a lot of money. I’m sharing lots of tips and tricks to save money on materials and make your next upholstery project go much more smoothly.
For a long time, I have had a major itch to reupholster a vintage couch. I have a bit of an obsession with stalking Craigslist and Facebook Marketplace for furniture that just needs a little love and I am constantly seeing insanely cheap vintage sofas with beautiful lines and proportions covered in hideous, worn-out upholstery. Every single time I think to myself, I bet I could save that old couch and make it gorgeous! And finally, I did. Yay me!
One day I was perusing Facebook when I saw someone had listed a couch and two matching chairs for sale. The fabric was bright yellow and shiny and incredibly dated but the furniture was in pristine condition and had gorgeous mid-century lines. And that tufting – I’m a major sucker for tufted furniture. But the real clincher was it was $50 total for the sofa and both chairs. I simply couldn’t resist snapping them up.
But once I had them home, I really struggled to try to decide what to do with them. I didn’t love the finish on the wood. From across the room, the dark wood looked nice, but up close it had an odd speckled finish. And those cut-out details on the side were very cool, but also not at all my style.
In the end, I decided to keep things simple and classic as much as possible and I love the clean lines of this sofa now even more. If you are a lover of mid-century modern style, you may not love what I ended up doing, but I’m pretty happy with it and to be quite honest, that’s really all that matters in the end.
This is a modal window. The media playback was aborted because too many consecutive download errors occurred.
In this post, I am going to talk you through the basics of how to reupholster a couch, share plenty of photos of the process, and hopefully answer your most pressing questions. My particular sofa is a vintage, tufted sofa with wooden arms but a lot of the same upholstery principles apply to any type of couch. Above all, I hope that reading this post gives you the confidence to tackle your own sofa upholstery project. Because if I’m going to save all of the gorgeous old sofas on Facebook, I’m definitely going to need some help!
If you have zero desire to actually reupholster a sofa and you’re just here for the cool before and after pics, go ahead and scroll to the bottom for plenty of pics! And while you are there be sure to also check out the latest furniture transformations from the rest of The Furniture Flippers. I’m never disappointed by what they share.
TIME AND COST OF REUPHOLSTERING A SOFA
Reupholstering a sofa sadly is not a quick and easy project. If you have ever looked into paying someone else to reupholster your furniture, you know it costs a LOT of money and there is a good reason for that. Upholstery is time-consuming especially when you are dealing with something as large as a couch. I didn’t track how long it took me to completely redo this sofa, but it could easily have been 20 hours total between removing the old upholstery, refinishing the wood, adding the new upholstery, and sewing the cushions.
This also isn’t necessarily an easy project. It doesn’t require any highly technical skills, but there are a lot of steps and it can quickly become overwhelming. I would not recommend taking on a sofa as your first upholstery project – at least do a few simple dining room chairs first to get a feel for the process. (If you’re looking for more upholstery inspiration, head over to check out my other upholstery projects including this reupholstered armchair, this reupholstered leather settee, or these simple dining chairs upholstered with a shower curtain.)
Personally, I was most nervous about sewing the new cushion covers. I have complete confidence in my ability to wield a staple gun after doing several upholstery projects in the past, but my sewing skills are not the best. I strongly considered doing the body myself and hiring a professional just to sew the cushion covers. But in the end, my frugality won out and I just couldn’t bring myself to pay someone to finish my project. Luckily the sewing portion of this project went much more smoothly than I had anticipated.
The cost of reupholstering a sofa depends on several factors including the cost of the sofa you are reupholstering (unless you are working on a sofa you already owned), the cost of the fabric you choose, and whether or not you already own all of the necessary tools. My own sofa total came to around $90 including the cost of the sofa, all of the fabric, a covered button kit, and an upholstery staple remover (the only tool I didn’t already have.) This wasn’t a free project by any means but $90 for a nice sofa is still a total steal.
This post contains affiliate links which means if you make a purchase after clicking a link I will earn a small commission but it won’t cost you a penny more.
RECOMMENDED TOOLS AND SUPPLIES
Your exact supply list may vary slightly depending on the details of the couch you are working on, but these are the basic tools and supplies you will need to reupholster furniture.
Upholstery staple remover (this thing is a lifesaver)
Flathead Screwdriver
Needle nose pliers
Hammer
Sharpie
Staple gun
Upholstery twist pins
Trim
Liquid Stitch fabric glue
Fabric button kit
Upholstery needle
Piping cord
Zippers
Sewing machine (this is the one I have and love)
CHOOSING FABRIC
Aside from having a burning desire to take on reupholstering a vintage sofa, we also really needed a sofa for our living room and didn’t have a lot of money to spend on one. Even though I got the sofa for a steal, upholstery weight fabric can be expensive and it takes a LOT of fabric to reupholster a sofa. I consulted a few upholstery yardage charts and it looked like I would need 9 –12 yards of fabric for my sofa. Most upholstery weight fabric is $20+ per yard which would mean more than $200 just for the fabric!
Instead, I went with an alternative fabric that’s an old favorite among thrifty DIYers – drop cloth. A dropcloth is a heavy-duty fabric that is very inexpensive and looks a lot like linen. You can bleach or dye drop cloth, but it also looks really nice in its natural color. I bought a one 9’ x 12’ and one 6’ x 9’ drop cloth from Lowes for a total of $45 and still have plenty left over for other small projects. (If you are looking for more ideas for alternative places to find great fabric for DIY projects, I’ve got a ton of ideas right here.)
To prepare the drop cloths, I simply washed and dried them and then got to work. It is a good idea to also iron your fabric at this point, but I was impatient and skipped this step.
REMOVING THE OLD UPHOLSTERY
The first step of any reupholstery project is removing the old upholstery. This isn’t a crazy ‘demo day’, rip it all off kind of project. You want to remove everything very carefully and pay lots of attention as you work. Removing the old upholstery will teach you pretty much everything you need to know when it comes time to add the new upholstery.
The majority of the fabric will be attached to the frame with staples. Lots and lots of staples. To remove all of those staples you have two choices. The first method is to use a flat head screwdriver to pry the staples loose and then use needle-nose pliers to pull the staples out. This method works great, but it takes a lot of time and your hands will get very tired.
The other option is to use a special tool for removing upholstery staples. You can buy one of these for around ten bucks and it is well worth it for a large upholstery project like this. I started out using a screwdriver and pliers before buying a staple remover and the old screwdriver method was so much harder and took twice as much time.
You’ll start by removing the piece of lightweight fabric underneath the sofa. It is easiest to turn the sofa upside-down before getting to work. Carefully remove the staples and pull the bottom piece of fabric off. This piece of fabric is often black or another dark color and serves to finish off the piece. Be sure to set it aside to be reused when you put the sofa back together.
Next, remove the fabric on the back of the sofa, starting at the bottom edge. Carefully pull the fabric off. You may find tack strips, strips of cardboard, or plastic pieces as you are removing the fabric. It is important to keep all of these along with the fabric. As you remove the fabric, label it with a marker, noting where the fabric was on the sofa as well as which end of the fabric is the top, bottom, left, and right. Also label all tack strips, cardboard, and plastic pieces and where they went on the fabric– these can usually be reused when putting the sofa back together.
It’s also a smart idea to take photos of your sofa before you start removing the fabric and at each step along the way. When it is time to put the sofa back together, these photos will come in handy.
Once the back is removed, look carefully at your sofa. Every sofa is put together differently and you will need to look closely at your particular piece to see which layer to remove next. Keep in mind that not every piece of fabric has to be removed; in some sections, you can simply staple the new fabric right on top of the old fabric. Any pieces that are attached smoothly and don’t have piping, tufting, or texture in the way can be left in place. On my own sofa, I was able to leave the fabric on the front panel and both side panels in place, simply removing the trim.
Somehow this is the best photo I have of the sofa once the old upholstery was removed. If you’ve ever wondered what it looks like doing DIY projects with three little kids running around, here’s a little glimpse into the not so glamorous behind the scenes.
REFINISHING THE WOOD FRAME
I know not everyone will agree with this decision but I had to get rid of those oval pieces on the sofa arms. They were not my style and they were messing up the nice clean lines of the arms. I went for the easiest route and sawed them right off with a handsaw.
After removing them, I sanded down the rough spots where they connected to the arms, filled them in with wood filler, and then sanded them again. So much better.
As I mentioned, the dark wood frame of my sofa looked nice from a distance, but it actually had a very dated speckled faux finish up close.
I really wanted to lighten up the dark color but I wasn’t about to strip the old finish off of all those curves and details. Instead, I used paint to create a lighter faux wood finish. To keep this post from becoming insanely long, I’ve written a separate post with a full tutorial of my faux wood finish method and will simply share the overview here.
I used a dark brown and a light tan acrylic craft paint and a chip brush. I mixed the two brown colors together in varying strengths to make a few different browns and dry brushed them onto the wood in layers.
Once the paint was dry, I used General Finishes Flat out Flat Topcoat to seal the finish. (This is my favorite topcoat anytime I want a matte finish for a painted piece of furniture.)
REUPHOLSTERING A SOFA
Ok, finally it is time to actually get to the upholstery. Use the fabric you removed from your sofa previously as a pattern when cutting your new fabric. Be sure to also allow enough fabric for upholstering any areas where you didn’t remove the original fabric as well as recovering the cushions.
When you are reupholstering your sofa, your goal is to put the sofa back together in the same way you took it apart. Wherever the old fabric was stapled to the frame, you will be stapling the new fabric. Wherever tack strips held the fabric in place, use tack strips. If the old fabric was folded over a piece of cardboard to make a straight edge, fold the new fabric over the cardboard as well. If any of your tack strips of a bit of cardboard were damaged during removal, you can purchase new ones on Amazon.
As you attach the new fabric to your sofa, it is very important that you pull the fabric nice and tight. The biggest reason some DIY upholstery jobs end up looking less than professional is that the fabric was too loose and because wrinkly and not polished looking.
You are going to work in reverse order of how you removed the old fabric. Start with the places you didn’t remove the fabric at all, then move on to the last places you removed the fabric. For most sofas, you will start with the panel on the front of the sofa which is typically attached to the bottom of the couch with staples and sewn under where the couch cushions will be. Once you have stapled the bottom side, you can either hand sew the final side or you can go a much easier route and use upholstery pins instead. Upholstery pins are pins with a curved end that twists down into the sofa to hold the fabric firmly in place. They won’t be seen once the cushions are in place and they hold the fabric nice and snug with no sewing needed.
Continue putting the new fabric on in the same way you removed it. You may also need to attach the trim to cover some of the staples.
My sofa originally had double welting trim that was stapled over these edges. Since I was trying to avoid extra sewing (and extra work) as much as possible, I chose to buy trim instead of making my own double welting. I found a simple braided cord at JoAnn’s Fabrics that matched my drop cloth upholstery quite nicely and used Liquid Stitch fabric glue to attach it. It covered all of the staples nicely for a beautiful finished look without a ton of work.
Article Source: https://www.lovelyetc.com/reupholster-sofa/
Also, find out the listing and bookmarking links
http://www.getlisteduae.com/listings/sofa-upholstery-in-dubai-2/
https://www.callupcontact.com/b/businessprofile/Sofa_Master/7495990
https://www.callupcontact.com/b/businessprofile/Sofa_Master/7495990
Comments
Post a Comment